PDT 6000H Rotary Gerotor Pump

The PDT 6000-H Rotary Gerotor Pump uses our proven 3” diameter Gerotor gear group optimized for pumping adhesives with viscosity ranges from 1000 cps to 2,500,000 cps. The pump is approved to run up to 40 RPM and outputs between .64 and 2.55 cubic inches per rev depending on Rotary Gerotor Pump size (see chart below).

Featuring hardened tool steel components and a wet seal, this pump is ready for high volume urethane applications. Standard SAE ports, 1” diameter shafts and face-mounted design make integration easy for both new and existing systems.


  • Positive displacement
  • CW or CCW operation
  • Hardened tool steel components
  • SAE straight thread ports
  • Wet gasket for longer lasting seal
  • Compact design for robotic applications
  • Works with low & high viscosity materials
  • Proven design, quality-checked build
  • Reliable post-sale service
  • Different Sealing Materials available
  • Stainless steel pump body for use with corrosive materials
  • #16 SAE straight thread ports
  • 3000 PSI max. working pressure
  • Std. Lubrithane seals
  • Works up to 180° F temps depending on seal
  • Maximum RPM: 40+ depending
  • 1” diameter shaft

Click to Download PDF